This is the final product - a sailboat & tractor to go in his green & blue room! |
This is the outdated art I decided to repurpose. |
So first I painted the whole thing white... It took 2-3 coats of just trim paint we had in the attic. |
Then I used painter's tape to make my stripes. Each side of my canvases were 23.5" and I wanted 7 stripes... so I measured & marked my lines on the sides. |
Then I painted 4 of the stripes navy blue. This is what it looked like after I took the painter's tape off. |
I found pictures online of a tractor & sailboat that I liked. Then I drew them onto contact paper the sizes I wanted. |
Then I used an exacto knife to cut them out. |
At this point, they looked like this. Yes. The Juice Shop is the official sponsor of this pregnancy. Specifically, Guava Gulps. |
Then I put the contact paper onto the canvases & painted the green over it. I used the leftover green from his bookshelf, but I lightened it a little with white to create more contrast with the blue. |
This is what they looked like overnight. I was a little scared I'd just end up with green blobs. |
The next morning they weren't blobs... but they certainly weren't perfect! The contact paper worked fairy well, but didn't stick to the painted canvas as well as I'd hoped. |
See... needed some touch ups. |
Especially around the tire. |
So I used a small brush to go around the edges. |
It didn't end up taking very long at all. |
Voila! A sailboat... |
...and a tractor! |
Aaron (with a little hammering help from Davis) hung them on the wall for me! |
There we go! Getting close to being done...! |
Love these - and using them as inspiration for my little guys "big boy room" :) 2 questions -
ReplyDelete1) Why did you use double lines of painters tape to measure off? And do you remember the distance between the stripes?
2) Did you free-hand draw the tractor and sailboat - or did you print something off and cut/trace?
Thanks! willrunformargaritas@gmail.com